Warning: imagecreatefrompng(): gd-png: libpng warning: iCCP: known incorrect sRGB profile in /home/server476511/ftp/strona/libraries/vendor/joomla/image/src/Image.php on line 703

RATMON is a globally operating technology company, offering innovative solutions for the remote monitoring of urban infrastructure such as district heating and cooling systems, water and wastewater network infrastructure.  We are also active in the SMART Building industry, offering solutions for monitoring leaks in buildings, protecting critical infrastructure. 

RATMON's key strengths are its team of experts, with over 20 years of experience in the industry, its individual approach to each customer, as well as the comprehensiveness of the products and services provided. The company's mission is to create safe and energy-efficient solutions that help improve the condition of infrastructure and ensure their safety and efficiency for many years to come.

In its activities, the company puts great focus on education, offering training for industry professionals to raise awareness and their qualifications.

Image

District Heating

Comprehensive leak detection system for monitoring of pre-insulated district heating networks. We offer devices for permanent network surveillance and fault location. All devices are integrated with a dedicated, authorized remote surveillance system. Permanent monitoring is performed on all necessary parameters both in networks based on impulse (Nordic) alarm system, resistance or sensor cable regardless of pipe material (plastic, steel).

RAT-2

Device for remote monitoring of pre-insulated district heating networks. Failure detection is carried out by measuring the foam insulation resistance and continuity of the alarm wires.
Image

RAT-2b

Device for remote monitoring of district heating pre-insulated networks. Dedicated to detection and localization of faults in resistance alarm systems.
Image

RAT-Combo

Diagnostic device for detection and location of faults in Nordic networks. Detection is based on resistance measurement and localization using TDR technology.
Image

ILA 1.0

Device is designed for monitoring, detection and location of faults in pre-insulated networks. Detection and localization is based on TDR technology.
Image

MSC-1

The MSC-1 sensor cable enables precise detection and location of faults in pre-insulated pipes used in the heating and cooling industry. It is also used in leak detection in buildings and dual-containment pipes.
Image
Image

District Cooling

RATMON's products and solutions are successfully applied in pre-insulated networks used for transporting of cool water. Thanks to a comprehensive system using the company's own MSC-1 sensor cable and dedicated alarm units, customers receive a solution with high performance, resistant to human error and adverse effects occurring in this type of network, such as the effect of condensation.

RAT-Combo

Diagnostic device for detection and location of faults in Nordic networks. Detection is based on resistance measurement and localization using TDR technology.
Image

ILA 1.0

Device is designed for monitoring, detection and location of faults in pre-insulated networks. Detection and localization is based on TDR technology.
Image

MSC-1

The MSC-1 sensor cable enables precise detection and location of faults in pre-insulated pipes used in the heating and cooling industry. It is also used in leak detection in buildings and dual-containment pipes.
Image
Image

Water pipe lines

Based on the MSC-1 sensor cable, we have developed a system for monitoring and locating faults in plastic water pipelines. This solution is one of the first on the market to control problematic leaks and prevent external damage to water pipes, which translates into reduced losses in an era of decreasing drinking water supplies in the world.

RAT-Combo

Diagnostic device for detection and location of faults in Nordic networks. Detection is based on resistance measurement and localization using TDR technology.
Image

ILA 1.0

Device is designed for monitoring, detection and location of faults in pre-insulated networks. Detection and localization is based on TDR technology.
Image

MSC-1

The MSC-1 sensor cable enables precise detection and location of faults in pre-insulated pipes used in the heating and cooling industry. It is also used in leak detection in buildings and dual-containment pipes.
Image
Image

Leak Detection System in buildings

Our solution consisting of the MSC-1 sensor cable and the ILA-1 device has been successfully implemented to detect and locate leaks in buildings. The sensor cable cab be installed underneath of technical floors and/or along pipelines inside the buildings. Continuous monitoring of leaks in buildings, especially in critical  infrastructure such as server rooms, is an important part of infrastructure security. The RATMON solution has also found application in dual-containment pipes, used e.g in drainage systems.

ILA 1.0

Device is designed for monitoring, detection and location of faults in pre-insulated networks. Detection and localization is based on TDR technology.
Image

MSC-1

The MSC-1 sensor cable enables precise detection and location of faults in pre-insulated pipes used in the heating and cooling industry. It is also used in leak detection in buildings and dual-containment pipes.
Image
Image

Monitoring of tanks, chambers, manholes, river levels

One of the troublesome problem is the continuous monitoring of underground infrastructure. To address this problem, RATMON has introduced the SAM-1 and SAM-2 universal telemetry unit. These units can be equipped with multiple sensors depending on the customer's needs. Using state-of-the-art electronics and IoT communication technology, the unit can run on a single battery for up to 5 years. This solution, can also be successfully used to monitor river levels. 

SAM-1

It is used for remote monitoring, i.e.: tanks, manholes, chambers and other spaces exposed to harsh conditions. Cooperates with various sensors, such as: flooding, opening, temperature, pressure, etc.
Movie
Image
Image

Diagnostic portable devices

RATMON's portfolio includes a range of portable diagnostic devices, which are used both during the construction of new pipelines and during their maintenance. All RATMON products are characterized by universality of application regardless the type of alarm system used in the pipes, as well as the ability to record measurement data and create reports.

MEGALOC-1/1b

Diagnostic device for fault detection and localization, designed for difficult operating conditions. Supports any type of alarm system including impulse and resistance.
Image

SMARTLOC-1

Dedicated diagnostic device for inspection of alarm systems in any type of pre-insulated network. Works well during network construction and later maintenance.
Image

SMARTBOX-1

Device that allows remote simulation of network conditions for easier fault location. Thanks to the remote control ability, there is no need for an additional person at the simulation site.
Image
Image

Software

RATMON has launched a dedicated remote surveillance system of pre-insulated networks and other underground infrastructure, like eg. chambers or manholes. It is web-site application, which was created based on opinions and consultations with people involved in the daily supervision of pre-insulated networks. Thanks to that the system significantly simplifies the work of teams responsible for supervising the infrastructure.

Ratmon

Comprehensive remote leak detection system with access from anywhere on earth.
Image

Fusion Mobile

A mobile device application that allows us to view measurement results as well as operate equipment.
Image
Products Catalog
- PL version
- EN version
- DE version
- FR version
Accesories

RATMON products are characterized by high universality of applications, therefore, to help customers, various additional accessories have been prepared, such as junction boxes or a battery module. The accessory database is constantly being developed
in response to market demands.

| DOWNLOAD THE ACCESSORIES CATALOG |

Software

RAT Manager

| Download | 
Using the RAT Manager application, you can configure the RAT-2, RAT-2b, RAT-Combo devices. The application also allows you to update the device's internal software.

SAM Manager

| Download | 
Using the SAM Manager application, we can configure and test the operation of SAM telemetry units.

Ratmon Mobile

| Download: Google Play
Application for mobile devices, thanks to which we can constantly view current measurement results from RAT series devices.

Fusion Mobile

| Download: Google Play | App Store
Application for mobile devices thanks to which we can:
- remotely control SMARTBOX-1 devices
- configure, read results, create reports from SMARTLOC-1 devices
- configure and view results from SAM-1 telemetry units

Support

RATMON Ltd.

ul. Ciepłownicza 19
31-574 Cracow, Poland

NIP: 6793226741
REGON: 520429947

Contact

+48 12 296 50 68
e-mail: ratmon@ratmon.com

Poland:
Patryk Czaniecki - tel.: +48 663 226 322
e-mail: p.czaniecki@ratmon.com

Export:
Jan Głowacki - tel.: +48 691 996 472
e-mail: j.glowacki@ratmon.com